The first thing to start when choosing tires for an ATV is to determine the optimal wheel diameter. To do this, it is enough to know a simple rule: the larger the diameter of the ATV wheels, the larger the contact patch and the higher the off-road capability. On the contrary, a tire with a small diameter will allow you to develop a high speed, however, off-road performance will be lower. See more at best atv tires

When choosing the correct tire diameter for an ATV, pay attention to the engine size. ATVs, with a volume of up to 50 cu. see susceptible to changes in the standard wheel diameter, with an increase in volume, the sensitivity becomes less.

But a measure is needed in everything: installing tires that are too large for an ATV will have a detrimental effect on the viability of the engine, suspension, and transmission. In addition to the increased load on the ATV systems, installing large, heavy wheels will also reduce torque.

ATV radial and bias tires

Unlike car tires, ATV tires have a predominantly diagonal design. You can read how a radial tire differs from a diagonal tire in the corresponding article , but here we will tell you what the pros and cons of this or that tire for use on an ATV.

The radial tire for a passenger car perfectly retains elasticity and the contact patch remains unchanged, due to which the car maintains directional stability. But ATV tires rarely get acquainted with flat asphalt, and therefore their contact patch is not stable and it needs to adapt to rough terrain. ATV tires must be able to withstand permanent deformation and have a solid sidewall. Only bias tires for an ATV meet these requirements. On the other hand, an ATV radial tire is needed for road and sport quadriks.

ATV Tire Tread

The permeability depends on what kind of tread the tire has for the ATV. Moreover, the more cross-country ability, the less speed and controllability on an asphalt road. So, the high directional symmetric sipes of the rubber tread for an ATV will allow you to easily overcome swamps, swamps, but on the road, the behavior of an ATV with swamp tires will be far from perfect.

Therefore, if you need to get to the place of adventure on a regular road, it is better to choose tires for the ATV with an asymmetrical pattern, which will increase traction. If the sipes are high and directed, the flotation will be good, and the directional sipes help the tires self-cleaning.

Mud tires for ATVs with their tread resemble the swamp tires described above. The only thing worth noting is that the symmetrical tread blocks of mud tires must diverge in different directions at an angle of at least 45 degrees to ensure excellent water drainage. The disadvantage of a mud tire for ATVs is poor lateral stability, which will "come out sideways" when riding on hilly terrain.

If your favorite travel destination is sand, then tires for an ATV should be selected on the basis of this: they should provide the maximum possible contact patch, the rubber itself should be as soft as possible, and the tread should have long blocks that work like a bucket, raking up the sand. Moreover, sand tires are the most highly specialized - they are absolutely not adapted to other surfaces.